Chemical Engineering

Next Page »

Glass Apparatus for Phase-Equilibrium Experiment
A tall and elaborate glass apparatus on a black metal stand. The glass apparatus has a funnel at its top extremity and a stopcock near its bottom. The apparatus features plastic fittings. The glass apparatus is attached to a black-painted metal stand with an unpainted metal clamp. The clamp is [Read More...]
Ceramic Samples for Neutron Activation Analysis
A 400ml Pyrex chemical beaker contains fragments of a brick-coloured ceramic. Some of the fragments are marked with a grid. Some pieces appear to have been cut into cubes according to this grid pattern. The container is marked “C. Soto” with an orange-red pigment. Within the beaker, there is a [Read More...]
Multichannel Analyser Faceplate from SLOWPOKE Laboratory
A metal instrument faceplate with a grey-silver finish, black lettering, and blue trim. Much of the front of the artifact is covered in dials and buttons. At the top left corner, there is a black plastic bezel for a CRT display. The CRT is not present. The opening is approximately [Read More...]
Iron Samples for Neutron Activation Analysis
A small, white-coloured cardboard box contains six labelled samples in glass phials with translucent plastic caps. The box and phials are labelled with paper labels, marked in blue pen and covered with yellowing clear tape. The samples are labelled 1 to 7. Sample 5 is missing. The glass phials contain [Read More...]
Three Way Ball Valve
This object is a white plastic box decorating with paper covered in writing/diagrams. Two grey plastic spouts stick out at right angles from two faces, these are screwed into sockets; one socket is missing its spout. There is a metal tap handle covered in red plastic on another face.
Three Way Ball Valve
This is a square plastic box covered in pirate-themed stickers. Three grey spouts emerge at right angles from three faces of the box. These are screwed into place and can be removed by unscrewing. On a fourth side there is a metal connection attached to a silver-coloured tap covered in [Read More...]
American Optical (AO) Abbe Spencer Refractometer
This object has a three sided iron alloy base. On the base is a track which mounts a small frame holding a metal plate. The metal plate rotates 360 degrees within its frame. Beside the track is a primary arm which extends vertically. The primary arm holds a double prism [Read More...]
Ingots of Cerroshield Alloy
Two small metallic ingots. The ingots have a rectangular footprint and taper slightly towards the top surface. The ingots have moulded lettering on their top surfaces.
Original Hanau Hollow Cathode Lamps (Cadmium)
Two glass cathode lamps. Each lamp consists of a sealed glass tube with a black and white label housed in a grey plastic case with a clear lid and an orange-brown foam liner. The glass tubes are cylindrical. At the base of each tube is a silver and black tube [Read More...]
Pye Unicam Hollow Cathode Lamp (Nickel)
A glass cathode lamp consisting of a sealed glass tube with a blue and while label housed in a grey plastic case. The tube is narrow at the top, wider at the bottom. At the base of the tube is a translucent plastic vacuum tube plug with two metallic electrical [Read More...]
Next Page »